![]() Bingo, bango the lines will be joined neatly at the junction. Simply hold your finger down on the shift key and pick two lines. Don’t worry about the current fillet radius that is shown. Type ‘FILLET’ at the command line to start the fillet command. The fillet command has a hidden option which is great for joining up corners. If you are looking for a little more precision, try the Fillet command. Tip: If you get an annoying prompt that says ‘Do you want to convert these lines to polylines’ set the ‘PEDITACCEPT’ system variable to ‘1’ to suppress it. Set this higher than your biggest overlap/gap and AutoCAD will join all your lines together in one fell swoop. This is the margin of error between lines that overlap, or don’t quite join. You will be prompted for a ‘Fuzz’ Distance’. Select all the objects you want to join, and then type ’j’ for the join option. Type ‘pedit’ at the command line, then immediately chose ‘M’ for multiple object selection. If the polyline won’t join up, you have identified a problem that needs fixing.Ī quick way to join multiple lines into one polyline is with the ‘PEDIT’ command. By turning your lines and arcs into polylines, you can be sure that the corner junction points are spot on. Polyline, fuzz distanceĬNC machines don’t like geometry that nearly, but doesn’t quite join up at the corners. You can read more about it in this post on converting Ellipses to Arcs. There are a number of other ways that you can convert Splines and Ellipses to polylines. But this is still a useful tool for those who don’t have another option. In tests, we have found that our CAD to CAM software does this better than AutoCAD. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |